Intel VCA setup issue
Hi, Unfortunately, I could not find the appropriate section for VCA on these forums, and since the main aspect of VCA is Intel graphics, I am posting my question here. I am trying to explore Intel VCA...
View ArticleClik here to view.
Does R1304WTTGSR support Windows 10?
I have Windows 7 Pro running on the Intel server R1304WTTGSR (S2600WT motherboard), but it is unsatisfactory in two respects: (1) Windows 7 only supports 192 GB of memory, while the hardware supports...
View ArticleMFSYS25V2 SharedLUN key
We have purchased a full populated MFSYS25V2 last week to have spare parts if something breaks on our MFSYS25 (V1).Now I would like to activate SharedLUN feature, but our reseller doesn't provide the...
View ArticleRaid Web Console 2 no servers and memory leak
I have been using Intel Raid Web Console 2 since having an Intel Raid controller. Still using it and have also tried the Avago version. Used to run. now no matter how many times I reinstall it, I...
View ArticleClik here to view.
System Firmware Progress, POST Err Sensor (#0x6)
Using Windows IoT, When I reboot computer, OS hangs, and front panel error LED turns red. Looking at the selview file, I find the above error. When I boot again, it does a windows repair, saying to...
View ArticleCabling configuration for 2 x intel FUP4x35HSDK to S2600IP4 motherboard in a...
I have a P4216IP4HKC server, which I am replacing boit the 8x 2.5' hot swap drive cages to 2 x FUP4x35HSDK Its not clear where the SGIPO and the I2c in and out cabling goes , with respect to the...
View ArticleBoot order changes back to EFI Shell
Hi, I've installed a new Intel Server System with Server Board S2600WT2R. I have two boot options:- Launch EFI Shell and- UEFI PCIE SATA: 8000000 (Integrated RAID controller) When I select UEFI PCIE...
View ArticleClik here to view.
Intel S1200SPS sometimes hanging on restart with POST code 96h
Build:Intel S1200SPS Server MotherboardXeon E3-1245v5Kingston ValueRAM 2x8GB DDR4 2133MHz ECCSamsung 850 Pro2x WD SE 1TB HDD in RAID 1Windows 10 Professional The problem happens when selecting restart...
View ArticleHello! Please help what to do in the BIUS to hdd drive defined BIUS?...
Hello! Please help what to do in the BIUS to hdd drive defined BIUS? Motherboard INTEL server board st1200bl.
View ArticleClik here to view.
Problem with Intel s5500hcv, Intel S2600cp and Samsung V-NAND ssd 950 PRO M.2
Hello, I have a problem with Samsung V-NAND 950 PRO M.2.Recently i've purchased two Samsung V-NAND 950 PRO M.2 with PCIe Card > 1x internal NVMe M.2 NGFF Key M 110mm (by delock) adapter.I've tried...
View ArticleClik here to view.
S1200SPL can't connect to COM (RS-232) device (APC Smart-UPS SC620VA).
Serial port is enabled in BIOS.The same device with the same cable successfully connected to another motherboad (asus z97-a), so device problem is excluded. Tried Win2012,Win2008R2,Win8.1Should I...
View ArticleClik here to view.
intel_iommu0: DEBUG: generated a fault event when translating interrupt...
Hi all, I am working on Solaris 11.3 HBA driver development. We have configured and enabled MSI-x interrupts for PCI device. At times, while loading our driver we are seeing the OS crash. Looks like...
View ArticleClik here to view.
Xeon E3 1265LV3 vs E3 1276V3 same graphics?
Hi allI have a HTPC based on an Intel S1200V3RPM server board with a XEON E3 1265L V3 processor. Some time ago, I wrote here https://communities.intel.com/thread/48407 in some detail about my problems...
View ArticleClik here to view.
smash-clp turn on the system
I ssh into a s2600wt BMC and I want to turn on the system via SMASH-CLP console. show system1/pwrmanagement1 returns the property of CurrentPowerState set system1/pwrmanagement1 CurrentPowerStatus=ON...
View ArticleClik here to view.
Server S1200v3RP no keyboard after coin battery replaced, RTC error displayed
In trying to diagnose what I thought was a keyboard problem,(I was unable to interrupt the boot sequence to change theboot device) I replaced the coin battery; now it continuously reboots, with...
View ArticleS1200V3RPM no boot after BIOS update
I upgraded the BIOS of my S1200V3RPM (XEON E3 1265L V3) to 3.03.0006To do this, I insterted a USB stick with the new BIOS, booted to the internal EFI shell and then the BIOS upgrade started by itself....
View ArticleClik here to view.
Intel Server Board S1200V3RP
Проблемы с запуском материнской платы Intel Server Board S1200V3RP. Конфигурация ПК: 1) Minitower Chieftec LT-01B-OP. 2) Intel core i3-4370 3.8 GHz. 3) Kingston HyperX в Fury <HX318C10FRK2/16> 4)...
View ArticleMotherboard intel s2600sw
Hello. Motherboard intel s2600sw. Trying to install windows (server 2012 r2,10,8.1) , it hangs at the stage bootloader of the system.The installation of Windows 7 and Windows server 2008 R2 runs fine ....
View ArticleClik here to view.
Intel® Server System R2312WTTYSR and Hyper-V
Hello!I have problem with hyper-v. I try to install VM on Windows Server 2012 R2 or Windows 10 and the VM is "hung".The OS is clear. OS on the server - Windows Server 2012 R2System BIOS -...
View Article