S2600CP no bios splash.
Dear Intel Community, I've paired an SC2600CP with a Xeon E5-2650. When I boot I get the constant green LED signalling System Status "OK", yet I fail to get a BIOS splash or any video feed.From the 8...
View ArticleClik here to view.
Front panel USB 3.0 cable for P4000G chassis
Hi I would like to know if this cable is available to buy anywhere. It is used in P4304XXMFEN2 and P4304XXMUXX.I would appreciate any information provided (manufacturer with part number,...
View ArticleClik here to view.
S2600CP2 - On losing PSU power, it won't post, except after a CMOS flash,...
S2600CP2 - On losing PSU power, it won't post, except after a CMOS flash, even on a clean shutdown from OS - Feature or known issues and how to change if its a feature? I have two S2600CP2 boards,...
View ArticleS2600CP keeps rebooting before post
I have a S2600CP with 2 e5-2670. when I received the motherboard, I booted it to check CPU and RAM and worked fine.Now, 2 weeks later as I'm assembling the server, the motherboard powers on for a...
View ArticleClik here to view.
Which hot-swap backplane is included with P4304XXSHCN?
Putting together a part list and would like to know if the 6 GB/s backplane (iPC FUP4X35HSDK or FUP4X35HSBP) or 12 GB/s backplane (iPC FUP4X35S3HSDK or FUP4X35S3HSBP) is included. Looking to pair this...
View ArticleClik here to view.
S5000PSL No Boot or Fan Spin-up
This is my first true server board that I've worked on. Until now, Ive only been using refurbished desktops with Ubuntu server. I purchased and Intel S5000PSL from someone on Ebay, said to be a working...
View Articles1200sps
I welcome!At me problem with s1200sps In case of installation of the Windows 7 64bit/server 2008 r2 - doesn't see usb the keypad and a mouse, I can't begin installation!I apologize if a question...
View ArticleS2600 Server shutdown issue
Just has a S2600 server shutdown without notice. Following is from Event logs just like some thought on what is most likely cause. Server is UPS protected and other servers on same UPS had no issues....
View ArticleClik here to view.
S1200SPL Negative temperatures via BMC. What is wrong?
Hi All, the BMC embedded web server shows same negative temperatures (see attachment). First of all is CPU temperature. All firmwares (BIOS, ME, BMC, FRU/SDR) are updated to newest. It should be said,...
View ArticleI have motherboard S5500BC and 1 installed processor Xeon E5520. I want to...
I have motherboard S5500BC and 1 installed processor Xeon E5520. I want to replace all the memory. I bought 2 of the Kingston (Hyperx Furry HX318C10F/8). Each module is 8 GB. After you install the new...
View ArticleClik here to view.
S5000VSA error code 19F
S5000VSA SASBios version: s5000.86B.15.00.101Built date: 11/09/2010 2 x Intel Xeon 5310 1.6Ghz I have error 19F:Processor and chipset stepping configuration is unsupported. By continuing to boot, you...
View ArticleS2600CW server board not detecting M.2 SSD
Hello All, I am building a WS using the S2600CW and don't intend to use it as a server.I have a dual E5-2660 v3 setup with 64 Gig RAM and a Quadro M4000. I plan to use a Samsung SM951 M.2 SSD as the...
View Article5520SC Network Driver Device ID 10AA
Hi!I bought an used Intel 5520SC and it looks like the network eeprom is corrupt because it shows 10AA as Device ID and no driver is working. Is there any chance to correct this? There is of course no...
View ArticleRMM and No signal
Hi,I try start Remote console from Integrated BMC Web Console (RMM).I press Launch Console and get new windows with "No Signal"I use only internal video card. Use - IE11 and Java 8.91Maybe i need turn...
View ArticleClik here to view.
S2600CW2SR won't post, gives 1-5-4-4 beep code
As the title suggests, I cannot get this board to POST. I've tried with only one stick of RAM and the board out of the case I purchased for it, but no matter what I do I still get a 1-5-4-4 beep code....
View ArticleClik here to view.
s2600cp BMC Firmware Failure reported, fans at 100%
I have SuperMicro system (I think SS-AMZ1BA02) with s2600cp board installed. My fans are running at 100% all the time, and that's very annoying. I've tried a lot of different things to battle that, but...
View ArticleRed LED flashes on the baskets supermicro
Hi! I have the server Supermicro X8SI6-F / X8SIE (-F) / X8SIE-LN4 (F)Are the 3 disks in raid 5.Red LED flashes on the baskets, which drives 1 and 2 (0 - green).The Intel Matrix Storage Console shows...
View ArticleIs there a specification on the R2208WT2SR MTBF?
I would like to know the MTBF for the R2208WT2SR server. Thank you, Steve Wasilko
View ArticleClik here to view.
SC5400LX - SROMBSAS18E - F/W is in Fault State
Hi, I have a SC5400LX Intel System with a SROMBSAS18E installed (AXXRAK18E Key). The raid card is connected to a 6-Drive Hot-Swap Expander Kit (AXX6DRV3GEXP) and a 4-Drive Hot-Swap Expander Kit...
View ArticleW2600CR Debugging help needed.
Hello friends, over the past few months I've been trying to get this new build to work but nothing seems to work and the lack of debug output doesn't help.But after purchasing an internal VGA to normal...
View Article