S1200BTL option rom control greyed out
Hi all, I'm assembling a new system based on a S1200BTL board. It's inside a Supermicro chassis. I need to deactivate the oprom of a specific PCIe card, but the option rom control in "advanced/PCI...
View ArticleINTEL S5000VSA Error code: 0x0000005D Your Pc needs To Reboot
Hello Hope Anyone can help me here.Am Trying To Install Windows Server 2012 RC On My Server Having 8GB Ram & Intel Xeon E5420 @ 2.50GHzAnd Am Getting This ErrorError code: 0x0000005D Your Pc needs...
View ArticleClik here to view.
SFP+ transceivers and twinaxial cables supported by the Intel X710DA2
Hi, I need to know what models of Intel (or other brands) SFP+ transceiver modules and twinaxial cables are fully supported and compatible with the Intel X710DA2 converged network adapter. I searched...
View ArticleClik here to view.
S5000VSA CPU not showing
Hi,I bought few months ago used server with Intel board S5000VSASASR. It was originally equipped with two Xeon 5030 and 4 GB of RAM. Both CPUs working. Then I was working on some projects and didn't...
View ArticleWhat is the successor for the S5520SC Motherboard?
HI, I have an SC5600 chasis and two E5645 processors. I recon that my current motherboard supports a certain level of hardware upgrades. If I only want to replace my motherboard and keep the chasis and...
View ArticleNeed help on "Error while reading from the disk" on SSD error
Hello,We have a system with followed configuration,CPU Type: Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz X 2 //Dual CPUsMotherboard Name: X10DAIMotherboard Version: 1.01Total Physical Memory: 65411MB...
View ArticleServer board s2600cw2 and Crossfire compatibility
I'm trying to enable AMD crossfire on a S2600CW2 without luck.Depending on the manual version i find this sentence."The server board supports up to three full length full height double-width PCIe cards...
View ArticleClik here to view.
BIOS/RAID BIOS screen would hold about one second, then system would run into...
Recently, one HD (RAID 5) has broken, and we reboot the machine. But after the reboot, we cannot boot into BIOS & RAID BIOS, also cannot boot into OS either. BIOS/RAID BIOS screen would hold...
View ArticleClik here to view.
s1200btl bmc Power Statistics shows 0w
Is it anything special that is needed to be done?
View ArticleIntel modular server - Ram failure. How to identify the broken bank?
Hi everyone,one of my two server had warning led on.Web interface say:ID:6417Type:IPMIDetailed Description:Sensor: Fault Indication; The Server 2 Fault LED has been illuminated. This amber LED is...
View ArticleHard disks disabled - one still shows up in bbosys
Hi there, I am trying to restore a BIOS configuration onto a S2600WT server and it fails because the system boot order doesn't match the configuration. That's understood - and syscfg /bbosys indeed...
View Articlememory speed decrease as more RAM is added ?
hi folks,I have heard but cannot confirm that the more memory one adds to a machine, the slower the RAM becomes.Is there a threshold from which the memory speed decreases? Does it relate to specific...
View ArticleS1200SPL chipset driver
Hi,I bought a new motherboard S1200SPL, processor e3 1220v5, P4304XXSFEN chassis.After OS installation (Windows 8.1 x64) and drivers installation I have some unknown devices:Intel 100 Series Chipset...
View Articles5000vsa cpu
Hi guys, I'm new to servers, I need your help. I recently bought a xeon x5450 processor and tried to insert his card when the download begins, there is a lot of post codes, and then downloads the BIOS...
View ArticleCan't run BIOS recovery on s2600cp2
I updated the BIOS on the s2600cp2 board from version 01.02.0003 to 02.06.0002. Its a pretty big jump but the notes said it was compatible. Now the system stays on the first screen that displays "Intel...
View ArticleClik here to view.
What model of nvidia is compatible with DBS1200V3RPS SERVER BOARD?
What model of nvidia is compatible with DBS1200V3RPS SERVER BOARD? Thanks,
View Articles5000xvn doesn't start: POST red-amber-red-off
My s5000xvn doesn't start. No beeps, no screen signal, POST LEDS stops at Red-Amber-Red-Off state, corresponding to datasheet it means: "Entered EFI driver execution phase (DXE)". My...
View ArticleClik here to view.
S2600CP problem! please help me.
MotherboardS2600CPwhen connectingthe power supplyto the motherboardwill flash all LEDson the motherboard.What it is?
View ArticleS5520UR Reboots unexpectedly - Nothing on the logs
Hello, Ihave a S5520UR server running with Ubuntu 14.04.4 LTS (GNU/Linux 3.16.0-62-generic x86_64). For (apparently) no reason the server reboots randomly and I can't find nothing on the logs prior to...
View Article