PMBus in S2600CP Server board
Hi~ Is PMBus in S2600CP server board connected to CPU's I2C bus or IPMI? If PMBus is connected to IPMI, which IPMI commands we can use to monitor and control it? Would you show any example? Thanks, in...
View ArticleClik here to view.
RMM4 Lite only 100Mbit/s?
Hi,I have a S1200BTL + RMM 4 Lite running ESXi 5.5 (Free). As I plug in the RMM4 Lite module, the 82574L NIC (NIC 1) is doing only 100Mbit/s (OS). When I pull out the RMM 4 Lite, then it goes up to...
View ArticleS2600CP P4308CMHEN Fan Noise
Halo to all, I have an Intel Server P4308CMHEN with the S2600CP.Board Information: Product Name : S2600CP | Serial Number: QSCP35000469 | Part/Model Number : E99552-510 | FRU File ID : FRU Ver 1.00 I...
View ArticleINTEL P4308RPLSHDR SERVER SYSTEM WITH RSBL080
I have 2 servers like this. Issue with both is that hotspares fail on patrol reads. I narrowed it down to the fact they go from power transition to unconfigured bad state when patrol read starts. I...
View ArticleClik here to view.
Do RS2BL080 raid controller support 6TB SATA3 disks?
Hi, Do anyone know if RS2BL080 raid controller support new 6TB SATA3 disks? /Markku
View ArticleClik here to view.
speed fans for my sc5299ws
Hi everyone... I have a problem, I build a serverboard s5520sc in the sc5299ws chassis, and now my fan speed are very very high, bios and firmware already update, somebody have idea for me? Thanks...
View Articleimpitool raw command for S2600CP FANs
Hi, Please let me know ipmitool raw command for controlling S2600CP Fans?Could you show me the examples of ipmitool raw command for controlling fans in S2600CP board? Thanks in advance,
View ArticleUnable to install Windows 2008 R2 on GPT partition.
One of my friends sent me an Intel s5500BC Server for troubleshooting. He installed a Seagate Barracuda 3TB hard disk in it. However, when he installed Windows Server 2008 R2 64-bit on it, the...
View ArticleRS2BL080 RAID 10
Hi all Have been searching for answer before I posted, have kind of found an answer but need some clarification as well. So I run a S5520HC board with RS2BL080 controller, I have the 4 and 6 drive hot...
View ArticleClik here to view.
Which command line tool for S3500 SSD temperature behind RAID controller...
To be able to compare different fan setups I'm logging the temperatures of my drives. All drives are connected to an Intel RAID Controller RS25DB080. Using storcli (storcli64) or CmdTool2 (CmdTool264)...
View Articleboard s1200bts
Hello everybody! I have a board s1200bts, when power on it makes 1 long and 3 short beeps, then OS proceed, but applications hangs or shut down. Can anyone help? Thanks
View ArticleIntel Modular Server NTP is not synchronized
We have a MFSYS25V2 Chassi with firmware 11.5 and three compute modules. The servers running on the IMS Virtualization Manager. It was configured a NTP time server.The NTP time will not be accepted by...
View ArticleClik here to view.
rste uninstall
Intel, how can RSTe be uninstalled from a system running Windows Server 2012 R2 Core?- There is no control panel- The installation executable does not have an uninstall option- The registry is not...
View ArticleClik here to view.
Fan speed still high after firmware update on Server System P4308CP4MHEN
The motherboard (a S2600CP4) is preinstalled in the system, so the cabling should be correct.When I first turned the system on. both fans ran at hight speed. After doing the firmware update, the top...
View ArticleClik here to view.
can not install windows server 2012 on intel server board s5500ur
hello every oneI changed the bios to this setting :mass storage controller configuration :intel SAS RAID module : disabledonboard SATA controller : enabledSATA Mode : SW RAIDI have 2 hard that is...
View ArticleClik here to view.
Xeon E3-V3 and S1200V3RPL supported memory voltages?
Hello, Does S1200v3rpl and Xeon E3 1200 v3 support 1.5v memory as well as 1.35v I wasn't aware of the LV requirement and have built systems with 1.5v RAM and they have worked fine. But does the...
View ArticleClik here to view.
Update BIOS on S2600CP4
I have an older S200CP4 server board (Jun 2012) with a BIOS v 01.02.0005. Is it possible to update the BIOS to support recent processors such as the 2697 v2 ?
View Articles5000xvnsatar bios update file
I happen to have a new old stock s5000xvnsatar motherboard and am looking to find the last bios update they made in 2010 but am not having much luck. I am not sure if all the boards marked s5000xvn had...
View Articledisk not suitable for os message when preparing disk for os install (windows...
Intel mod server mfsys25 with dual scm. while attempting to install w2k8 on one server, continue to get error msg "cannot load os on this disk" change disk boot order in bios (have tried this multiple...
View ArticleClik here to view.
S2600GZ undocumented LED diagnostic code?
We have four identical servers based on the S2600GZ board, three of which are running with the POST Code Diagnostic LEDs lit in the combination 1101(amber)0100(green), while the fourth one has all of...
View Article