Hello everyone... I'd like to update subj., but faced with a problems.
I have obtained latest (2012) S3200SH_BIOS52_BMC40_FRUSDR15.zip and flashing tools S3200_Linux.zip. Then extract and run:
[root@localhost Linux_OFU_970_B3.4]# ./setup_linux
INTEL END USER SOFTWARE LICENSE AGREEMENT
Blah-blah, agree to grant your soul to Intel...
Press 'Y' if you agree with the above terms.
Press any other key to exit Setup.
Installing flashupdt...
The server board could not be identified for correct operation of this update
Any ideas???????
Additional info. Sorry, did not found a spolier tag:
ipmitool> bmc info
Device ID : 33
Device Revision : 1
Firmware Revision : 0.29
IPMI Version : 2.0
Manufacturer ID : 343
Manufacturer Name : Intel Corporation
Product ID : 58 (0x003a)
Product Name : Unknown (0x3A)
Device Available : yes
Provides Device SDRs : no
Additional Device Support :
Sensor Device
SDR Repository Device
SEL Device
FRU Inventory Device
IPMB Event Receiver
IPMB Event Generator
Chassis Device
Aux Firmware Rev Info :
0x01
0x09
0x00
0x32
[root@localhost Linux_OFU_970_B3.4]# dmidecode | more
# dmidecode 2.12
SMBIOS 2.5 present.
61 structures occupying 2438 bytes.
Table at 0x7FDFA000.
Handle 0x0001, DMI type 38, 18 bytes
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x10
NV Storage Device: Not Present
Base Address: 0x0000000000000CA2 (I/O)
Register Spacing: Successive Byte Boundaries
Handle 0x0002, DMI type 1, 27 bytes
System Information
Manufacturer: Intel Corporation
Product Name: S3210SH
Version: Not Specified
Serial Number: 000000000000
UUID: BB7F9331-4013-11DE-AED6-000BAB025014
Wake-up Type: Power Switch
SKU Number: English
Family: Not Specified
Handle 0x0003, DMI type 2, 16 bytes
Base Board Information
Manufacturer: Intel Corporation
Product Name: S3210SH
Version: FRU Ver 0.04
Serial Number: QSSH91900069
Asset Tag: 00000000000000000000
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Not Specified
Chassis Handle: 0x0000
Type: Motherboard
Contained Object Handles: 0
dmesg
Program setup_linux tried to access /dev/mem between 7fefe000->7ff00000.
IPMI message handler: BMC returned incorrect response, expected netfn 7 cmd 35, got netfn b cmd 22
Program setup_linux tried to access /dev/mem between 7fefe000->7ff00000.
Program setup_linux tried to access /dev/mem between 7fefe000->7ff00000.
Program setup_linux tried to access /dev/mem between 7fefe000->7ff00000.
ipmi device interface
Program setup_linux tried to access /dev/mem between 7fefe000->7ff00000.