Hello! I can't run remote kvm on MFS5520VI Compute Module. I press the button "Apply", the window closes and nothing else happens.
Java v7upd51, address into the Exception Site List.
Please Help.
↧
I cant run remote kvm on intel modular server control
↧
S5000VSA PBA D29137-714 Processor Compatiblity
Dear All,
I did buy 2 unit used motherboard S5000VSA with PBA D29137-714 and i try with E5450 SLBBM CPU and it come out with error Processor voltage mismatch, what i'm refered on the net, my motherboard are non-refresh board, so may i know what CPU and Spec Number are compatible with my motherboard ?
Please help and Thank you so much
↧
↧
How to rre- enable onboard video on S2600IP4, after disabling it in bios?
whilst trying to figure out how to passthrough GPU cards in esxi, one of ways suggested was to disable onboard video.
It did not make any difference and now I cannot get onboard video back.
can anyone point to me how to do so?
much thanks!
↧
RT3WB080 Invalid field in CDB
I have an RT3WB080 installed in a personal server. On startup, the controller always logs "Information" for each drive "Invalid field in CDB". It only appears once per boot and all the drives are tested with no bad blocks.
What does this mean and how to correct it? This started appearing after I replaced failure-prone Seagate drives with new WD Red 3TB drives.
↧
RS2BL080 management ?
Hello,
I have the RS2BL080 raid controller.
Is there an application for Windows to enter its configuration ? (i want to setup email notification in case of HHD failure).
Thank you
Alex
↧
↧
S2600CO hangs at 9ah, USB_START, what's wrong?
Hi folks, finally made the jump to LGA2011 (from LGA771!) and have an issue.
My board is an S2600CO, with two matched E5-2643 CPUs. I have 16gb Crucial (Micron) 4GB DDR3-1600 CT4G3ERSLS4160B.18FKD, 4 DIMMS, correctly populated. ECC and all 4 match
There are no drives or anything else hooked up. All power connectors are in and this whole thing has me scratching my head.
Onboard diagnostic LEDs say that I'm hanging at 9ah, USB_START, and all I have installed are a usb keyboard and mouse. I've tried without the K/M and nothing changes.
I've reset the CMOS per the procedure listed in the manual and nothing. It makes a lot of noise and looks pretty.
Where did I dun goof?
↧
How to orginize hardware RAID 1 with two intel PCIe NVMe SSD
How to orginize hardware RAID 1 with two intel PCIe NVMe 2.0Tb DC P3600 / P3700 or P3608 for linux ?
I plan to use the platform R2208WTTYS in the creation of the database server with two Intel SSD DC S3710 Series 200GB in mirror for system, and two PCIe NVMe SSD for database.
With DC S3710 i don't have trouble because R2208WTTYS contain Intel RSTe , but i don't understand how to make PCIe SSD work in array.
And yes - i don't whant use MDADM.
↧
How to repair RMS25KB080 after failed flash attempt?
HI,
I tried to update the frimware of this card, but now its undetectable.
I think the firmware was flushed and then the computer rebooted.
how do I go about to bring it back to a working state?
thank you
↧
Сервер на основе SE7520BD2.
Здравствуйте. у меня тоже сервер на такой плате. перестал включаться. у одного блока питания желтая лампочка. у 2го- зеленая. при включении кнопки включения - происходит бип 1-5-4-4. даже если вынимаю "желтый" БП - все тоже самое происходит.
↧
↧
S5000VSA Heatsink Issue
Dear all,
I'm having problem with S5000VSA motherboard with Xeon X5355 CPU and the heatsink model C24751-002, when i turn on the power, the power is live only about 10 second and it will automatically shutdown, when i turn it on again it will shutdown again in 7 second, then i try to change the heatsink to another version D98510-001 and its not turn off, so i would like to double confirm is that issue related with heatsink ?
Thank you
↧
S2600CWT compatible with E5-2600v4 Broadwell-EP CPUs
Hello everybody,
I'm currently running a single E5-2609v3 in my S2600CWT Mainboard. I just did a Bios Update to the latest Version (01.01.016 I think).
In the changelog it says it supports v3 as well als v4 CPUs.
On the ARK Page for my mainboard, it says it is only compatible with the v3.
The question is, whether my Mainboard is compatible to the newer Gen v4 CPUs?
Kind regards,
Jannik
↧
Problem NIC Configuration Intel S2600CW
I have a problem with the Ethernet configuration on my new Intel S2600CW Board.
Windows Server 2010 R2 doesn't find any of the Ethernet interfaces. In the BIOS, the Page for NIC Configuration is empty.
I updatet the Bios to the latest Version:1.01.0016; 1.43.9685
But, I am able to set an IP address in Intel Active System Console and successfully send a ping.
But in the device Manager I have no Network Cards and no ungnown devices listed.
Does someone have any hint for me?
Best regards
↧
S5000PSL upgrade CPU
A processor with maximum performance (preferably 4-core) I can get in the S5000PSL?
PBA # D44771-801
Can I put these processors?
Intel® Xeon® Processor E5450 (12M Cache, 3.00 GHz, 1333 MHz FSB) Specifications
These links went, but did not understand whether my motherboard
http://www.intel.com/content/www/us/en/support/boards-and-kits/000006769.html
http://www.intel.com/content/www/us/en/support/boards-and-kits/000006633.html
↧
↧
where can I activate IMS features
Hi there,
We have some spare parts backplanes for the old MFSYS25V2 system and we would like to activate shared lun on those. The old imskey.intel.com does not work currently and the redirect:
https://serverservices.intel.com/imskey.html is also offline.
How can we activate the shared LUN for those spares? Because if we don't have the shared LUN, we can't use the spare parts.
Does any one have a clue?
Thanks,
Tim
↧
Multiple arrays with ESRT2
Is it possible to set up multiple RAID arrays (2 arrays, one with 3 drives(Raid 5) and one with 2 drives (Raid 1)) using ESRT2? The server board in use is S3420gp.
↧
s1200SPO fan noise
I've built a small file server around the S1200SPO. This is for a small company that has no riser room, or server room. The file server sits in an open concept office, but the fan noise is higher than their last Dell server so I'm trying to bring it down. I've set the option to "acoustic" mode in the BIOS but the fans continue to spin at full all the time. I thought that they would settle after the boot but they do not. They stay high. I know the chipset drivers are installed and there doesn't seem to be any drivers missing. Any ideas what I can try?
↧
S2600WT2 & HCL / discrete graphic card
Hi,
I'm in search of an HCL regarding the S2600WT2 Server Mainboard.
We'd like to add an discrete graphic card, but i cant find a HCL / QVL anywhere.
Any hints?
Goal is to run a discrete graphic card with 4x DP in the Server.
With best regards
Lars
↧
↧
Has anyone sucessfully installed Windows 8.1 on a S2600GL board?
Has anyone successfully installed Windows 8.1 on a S2600GL board? Wondering if I should buy it or not and not sure I want to unless I can get 8.1 running on it. Thanks
↧
ib0: can't use GFP_NOIO for QPs on device hfi1_0, using GFP_KERNEL
What does this message mean: ib0: can't use GFP_NOIO for QPs on device hfi1_0, using GFP_KERNEL
How do I fix this?
↧
SS4200-E Software Storage Manager Software
Despite not knowing the admin password, I was able to reset this device and assign a new admin account. The data is still there. I can reach the data via http, however if I attempt to install the software from Intel-EMC "Software Storage Manager", the installation runs through all the steps and at the end, there is a red X and it states that Sorry. Please confirm that all cables have been properly connected, your router is working properly, and the Intel Entry Storage System device has been turned on before clicking Next again. Click the Retry button to try again. Click the Back button to start the install again. I am running Windows 7. Any help would be very much appreciated.
↧